4-door Felt Retainer "U" shaped pieces of metal that nailed to the vertical door wood in which the felt channels set. Used on 4-doors with wooden framed doors. U.S.A.
Clip Use this clip at bottom of each felt glass channel strip.
Coupe Back Roll-Down Window Channel Kit For cars with back windows that roll up and down. U.S.A.
Double Arm Channel This glass channel is used on the 1931 Slant windshield 4-doors. Right and left are the same.
Economy Window Kit One kit does one door, assemble yourself and save. Contains: 2-32" felt channels, 1 upper sponge rubber, 2 upper clips, 3 lower clips, and 8 rivets, not assembled. U.S.A.
Felt Glass Retainers U shaped piece of metal that was spot welded and riveted in the door for felt channels to attach to. Rivet is included. Front refers to hinge end of door and rear refers to latch side of door. U.S.A.
Front Door Moldings, Slant Windshield These mount vertically along the front edge of the door, It gets screwed to the door, the felt channel attaches to it and the upright door garnish molding attaches to it with three screws. These...
Glass Bedding Cork composition bedding for mounting side window glass in the metal channel. 10 feet. U.S.A.
Glass Bumper When you roll the side windows all the way down, the glass channel sets down on this bumper that is mounted on a ledge inside the door. U.S.A.
Glass Bumper Bracket
Glass Channel This slotted metal
glass channel is
used on all of the Ford made 4-drs. and some of the other 4-door bodies.
Glass Setting Rubber The U-shaped rubber for mounting the rear window and the quarter windows in the framework.A-19003-R is 5'9" long, A-19003-C is 15' long. U.S.A.
Metal Glass Channel The metal channel
holding the bottom
of the door glass. The regulator arm fits into the slot in the bottom. Right and left are the same.
Coupes, Tudors, and 30-1 Trucks: A-45962
Tudor...
Murray Glass Channels Attaches to bottom of door window glass for the regulator to attach. These fit 1929-31 straight windshield 4-doors. 155-A, 155-C, 165-A, and 165-C. U.S.A.
Pickup Truck Channel The 28-9 Closed Cab Trucks used this style of window channel. U.S.A.
Power Window Kit Only available in 12-volt. Priced as a kit which does two doors. Kit includes regulators, glass channels, wiring, chrome switches, wiring and template for drilling door panel. Two holes have...
Regulator Gear Small drive gear used on the double arm style window regulators. Fits 68C Cabriolet, 30-1 Victoria, A400, and Slant Windshield 4-doors. U.S.A.
Regulator Gear Cup Used on the double arm style window regulators that were used on the 68C Cabriolet, 30-1 Victoria, A400, and Slant Windshield 4-doors. U.S.A.
Regulator Shaft This is the shaft that the window crank handle mounts to. Used on the double arm style window regulators that were used on 68C Cabriolet, 30-1 Victoria, A400, and Slant Windshield 4-doors. U.S.A.
Regulator Spring The main spring in the window regulator.
