To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
The Ford car was designed to use this extra heavy clinging type oil in the rear axle. This oil is almost a grease in weight and clings to the ring gear. Do not overfill. New squeeze bottle with...
The transmission main drive gear bearing oil slinger.
For the main shaft bearing. U.S.A.
This bearing is used on the main shaft of the transmission. Shielded on one side.
This ball bearing is used on the main drive of the transmission. Shielded on one side.
Two of the short bearings are used. One at the front of cluster gear and the other at back of the main drive shaft. U.S.A.
A very nice black rubber boot that fits over the brake handle and keeps the road dirt from getting into the car.
Used only on early 28's that had the brake handle that came through the sub rail to the left of the driver. Holds brake boot to sub rail on the left. U.S.A.
Black mushroom shaped shift knob with a quartz clock recessed into the top surface. Clock can be removed to change the battery. 5/16-24 fine thread.
Spacer that goes between the two roller bearings inside the cluster gear assembly. U.S.A.
U.S.A.
For the Model A Transmission. The shaft is fitted with an "O" ring to help keep the oil from leaking. U.S.A.
4 bolts and 4 lock washers to bolt the transmission up to the clutch housing. U.S.A.
No more guessing where the oil level is in the transmission! the kit gives you a tube with a dipstick that threads into the oil filler hole and a plate just like your battery cover plate to access...
Mounts inside the bell housing and seals the two holes where the shifting rails stick through. This is a common area for oil to leak by. Installs through the inspection cover plate of the bell...
A nice black rubber boot for the gear shift.
The original type was like this black hard plastic. 5/16-24 thread. U.S.A.
This chrome plated gear shift lever will fit all of the A's.
A rubber seal was used originally until Feb-March of 1928 to seal the floorboards to the shifter. This metal ring nailed to the floorboard to retain that rubber seal. Nails included. U.S.A.
A popular aftermarket accessory were these glass shifter knobs. Available in 4 different colors and styles. Round type as pictured or the shorter flatter type knows as 'mushroom' style. U.S.A.
