To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
A 3rd brake light is almost a must in todays traffic! This L.E.D. light is available in 6 or 12-volt and attaches to the back window glass using suction cups. Can also be wired to flash with...
Some states do not allow a half amber lense, so we offer this all red glass lense. U.S.A.
If you want to put your own blue dots in, we sell just the glass dot with a chrome rim.
This is an all red lense with a glass blue dot installed in the stop section. The blue dot has a chrome trim ring around it. U.S.A.
A molded rubber pad with a 1/8" rolled edge. Fits between fender and tail light bracket. Fits 1928-31. U.S.A.
Commercial vehicles used a lamp with a black painted housing. These lamps have black powder coated housing with a polished stainless rim. American made.
This special cast iron tail light bracket was used on the following vehicles: 1929-31 Station Wagon 1930-31 Panel Delivery 1930-31 Deluxe Delivery 1930-31 Deluxe Pickup & Special Delivery....
When adding a tail light to the right side, this wire will join the two tail lights to the main lighting harness. You will need a pack of the A-14487 connectors to make the attachment. U.S.A.
Replacement bayonet base bulbs for the bumper mounted directional lights.
Replacement wedge base bulbs for the bumper mounted directional lights.
Lamps have a chrome bezel and mount between the bumpers with out modification. Use on the front or the rear. 1928-31
Used in the later duo-lamp tail lamps. Will not work on the early drum tail lamps. This plate divides the upper and lower bulbs in the tail lamp. U.S.A.
Use these universal style sockets to convert any side or tail lamp to a dual filament bulb that can be used for turn signals or just to convert a gas lamp to electric! You will have to modify...
Exact duplicate of the original Ford unit. Use chrome for the 28-9's, stainless for 30-1's. Left side has lens on bottom to shine down on license plate. Right does not. All have 6-volt bulbs...
A flasher that is used when adding turn signals to your Model A. Many auto parts stores no longer carry the 6-volt flashers. U.S.A.
In some cases when you are running LED lamps, you don't create enough resistance to trip thermal flashers. This electronic flasher will overcome that problem. Also has a built in beeper!
For the clear license lens. U.S.A.
This gasket goes between the face of the tail light rim and the lens, but some people put one on each side of the lens to help and avoid cracking the lens. U.S.A.
A glass lense with the red section for tail light, and amber for the stop light. U.S.A.
Mounts inside the tail lamp behind the lens. Wires from the LED board simply plug into the sockets where the light bulbs were removed. LED lights use less current than conventional bulbs and...
