Model A Running Boards & Parts

The rib design matting for the 28-9 running boards. Each piece measures 46"x9-1/4". Adhesive backed, just peel and stick'em on. U.S.A.

This is a very well made set of boards & shields for the 1930 passenger cars. The shield is spot welded to the board and comes with the matting and zinc trim installed. Sold in pairs only.

The pyramid design running board matting for the 1930 running board. This has an adhesive backing so all you need to do is pull the backing off, and stick them on the running board. U.S.A.

USA

See additional features

These are the all steel running boards for the pick-up trucks. We handle only ROOTLIEB brand pick-up running boards. While they may cost a little more, it?s well worth the difference. As these...

For the front radiator splash apron. Rivet or glue to the splash apron to prevent rattles between the apron and radiator shell. The 1928-29 models use two and the 1930/31 use only one. U.S.A.

See additional features

These special bolts held the front bumper brackets to the frame. The heads of these bolts were drilled and tapped to accept the screws that held the radiator apron on as well. We have seen both...

Set of round headed bolts with lock washers and nuts. Round heads to resemble rivets. One set does all 4 brackets. Mounts running board brackets to the frame.

Ten 5/16 D. X 1" Lg. Round Head Rivets, Two 5/16 D. X 1-1/2" Lg Round Head rivets. U.S.A.

See additional features

Pressed steel running board brackets. They were originally riveted to the frame. We sell both rivets and bolts to mount them. U.S.A.

The special bolt with the high crown as original. 24 pieces per set. Bolts, nuts and lock washers. U.S.A.

Replacement trim for the running boards. Zinc was used originally, but we also offer stainless. Zinc will turn to a dull looking finish. The stainless is polished. Set does both boards. U.S.A.

See additional features

The running boards for the passenger cars. Come with zinc trim, and the rubber matting. All you need to do is paint the back side, and bolt'em on. 28-9's have the rib style matting, and the 30-1's...

Screws and nuts to mount the A-16400 step plates to the running boards. One kit is enough to mount both step plates.

Polished aluminum step plates for the Model A with an oval Ford script design 7-3/4 x 8-1/4.