To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
Goes from sediment bulb on firewall down to the carb. This is a plated steel line with brass fittings, not for late 31's. U.S.A.
This gas line was used on the late 31's with the indented firewall. You must have the late 31 side bowl style carb to use this line. Comes with correct late '31 fittings. U.S.A.
Brass gas line fittings like the originals. When you tighten it up, the ferrule will snap on the fitting. U.S.A.
The original style 9/16 head gas line fittings that were used on the 1931 Model A's. U.S.A.
Try this before you buy a new valve. U.S.A.
This thin material goes around the gas tank wherever the beaded cowl welt isn't used.
Hold the bottom of the tank in place. The 28-9 used 5 on each side, and the 30-1 used two on each side.
Use this when preparing your gas tank for the A-9002 sealer. Removes light rust inside the tank and leaves a gray phosphate coating. 16 oz. U.S.A.
This screen goes in the tank where you fill it. It is actually a flame arrestor. Won't work on the threaded version of this screen, only the tab version. Due to tab variations you will have to...
Removable extension makes refueling a Model A Ford easy using a modern gas nozzle.
When filling the gas tank, lay this down on the top of the tank to protect your nice shiny paint. Naugahyde with a soft lining. U.S.A.
This little screen presses into the gas shut-off valve where it goes into the gas tank. Prevents sucking gas off the bottom of the tank, and keeps junk out of gas lines. U.S.A.
A non-drying, slightly elastic sealer to give the old tank a new lease on life. Seals up pin holes and covers rust flakes. Specially formulated to resist alcohols that are added to today's fuels....
The nut that tightens down the packing of the gas valve. U.S.A.
This kit includes packing, jam nut, lock washer, and special gas resistant lubricant. You will need this kit when rebuilding an original valve. U.S.A.
We now have the handle only for the shut off valve. U.S.A.
This line runs from the gas valve under the gas tank to the sediment bowl on the firewall. A-9230-AR is on the bottom. U.S.A.
Kit is meant to accommodate the late '31 Model A's with the gas valve on the firewall but NOT running the correct side-bowl style Zenith carb. Kit gives you a glass bowl type sediment bulb along...
This style gas valve was used on the late 31's with the indented firewall. Solid brass and guaranteed not to leak. U.S.A.
The glass sediment bulb was actually a production option from mid 29 through 1931, but it will work on all years.