Model A Frame & Mounting

These rubber pads were nailed to the body mounting blocks to align the doors and the hood. U.S.A.

Good quality hardwood blocks that go between the sub rails and the frame. Complete set for the car or truck. If you don't see your car listed, then you probably don't need them. Many of the 4-doors...

Complete set of bolts to mount the body to the frame. U.S.A.

This is the bracket that is riveted to the frame rail, and the front of the body mounts to it. U.S.A.

This bracket is the one riveted to the frame that the rear hood clip is bolted to. U.S.A.

Complete set of rivets to rivet the running board brackets to the frame. This is how they were attached originally. Kit consists of: (10) 5/16 D. X 1" Lg. Round Head Rivets, (2) 5/16 D. X 1-1/2 Lg....

Set of round rubber shims used under the front of the cowl to align the doors and hood.

A special mount for the rear of the engine. Puts the rear of the engine on rubber. Takes the vibration away and gives a smoother ride. No drilling required. U.S.A. There has recently been a slight increase...

If your float-a-motor kit is in good shape but the rubber is not, this is all the rubber in the float-a-motor kit. U.S.A.

If the front of your frame got in a fight with another car and lost! These will fix it. Sold in pairs and you will have to put the holes in them. U.S.A.

A heavy grade of treated welt that sits on the frame. Treated so it will not rot. One roll is enough for a car. Welt is 1-1/2" wide, 1/16" thick. USA

Rubber pads for the rear motor mount. Made in the U.S.A. with good live rubber.

Complete bolt kit for mounting the rear motor mounts to the frame. Includes 6 bolts, 6 nuts, 6 spacers, and 6 cotter pins. U.S.A.

Bolts needed to bolt the rear motor mount to the flywheel housing. U.S.A.

The mounting pad fits between this plate and the frame.

36 piece bolt kit for mounting running board bracket to frame in place of original rivets. U.S.A.