Have a Technical Question? Click Here
Snyders Antique Auto branding
Account Login
We have gift certificates!
Now Accepting: Visa, Mastercard and DiscoverThis site is Verisign secure

To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.

Model A Distributor

Downloadable Extras:

Pages:  Previous | 1 | 2 | 3 | 4 | Next
  • Distributor Set-Up Gauge

    Aluminum collar and gauge used to set points and to check the shaft, bushing and distributor cam for accuracy. NOTE: Will only work with original style distributor, will not work with modern...

    Part Number Specifics Price
    1928-31 $105.00 / ea.
  • Distributor Shaft Pin

    The pin that holds the sleeve onto the upper shaft. U.S.A.

    Part Number Specifics Price
    1928-31 $0.25 / ea.
  • Drilled Upper Shaft

    The same excellent quality as our A-12178-S except we have drilled the top of the shaft so you can oil the bushings by simply lifting the rotor and dropping oil through the center of the cam...

    Part Number Specifics Price
    1928-31 $10.50 / ea.
  • Dummy Condenser
    Use this if you are installing the modern style upper distributor plate and want to maintain the original appearance. This is a dummy condenser that mounts in place of the original condenser...
    Part Number Specifics Price
    1928-31 $4.15 / ea.
  • Hardware Kit

    All screws, rivets, and insulators required for rebuilding a distributor. U.S.A.

    Part Number Specifics Price
    1928-31 $4.75 / set
  • Heat Shield

    Clamps on head with head stud nuts. Keeps manifold heat from distributor, and helps to prevent condenser from burning out. They are made out of stainless steel. Note: Cannot be used with manifold...

    Part Number Specifics Price
    Unpolished
    1928-31
    $4.00 / ea.
    Polished
    1928-31
    $9.50 / ea.
  • Ignition Tester

    This handy tool is great for checking to see if you have spark. With the car running, just hold against the spark plug to see if you are getting spark to the plug. Works on T's and A's. Can also...

    Part Number Specifics Price
    1909-31 $10.75 / ea.
  • Index Pin

    This tiny pin taps into a drilled hole in the top of the distributor housing and is what aligns your distributor body in the proper location. U.S.A.

    Part Number Specifics Price
    1928-31 $0.75 / ea.
  • Index Pin

    Sticks out the bottom of the distributor to locate the distributor on the head. U.S.A.

    Part Number Specifics Price
    1928-31 $0.85 / ea.
  • Lower Plate

    We make our lower plate assembly just like the original except we use a longer and modern wire. The wire makes a loop before going up to the points which takes the strain off of the wire when...

    Part Number Specifics Price
    1928-31 $8.25 / ea.
  • Lower Shaft

    For the 2-piece style shaft, this is the shaft that runs from the upper shaft to the oil pump drive gear. U.S.A.

    Part Number Specifics Price
    1928-31 $2.95 / ea.
  • Modern Distributor Cap

    Modern cap with plug wires and wire boots. Fits directly in place of the original distributor cap. This setup is beneficial if you are running a CB or radio in your Model A because it gets rid...

    Part Number Specifics Price
    Complete Kit
    1928-34
    $28.50 / ea.
    Cap Only
    1928-34
    $14.50 / ea.
    Wire Kit Only
    1928-34
    $14.00 / ea.
  • Modern Distributor Kit

    Everything you see in the photo to rebuild your old distributor modern style. Just like our regular kit except this one has the NU-REX modern upper plate and the long-wire style lower plate....

    Part Number Specifics Price
    1928-31 $70.25 / ea.
  • Modern Plate Adapter

    Newly redesigned and American made, the top of the clip has a broken over lip which eliminates the possibility of the the clip rotating and shorting out. Also the bottom of the clip has a bullet...

    Part Number Specifics Price
    1928-31 $3.50 / ea.
  • Modern Plate Points & Condenser

    Replacement points and condenser for the modern style upper distributor plate. sold separately.

    Part Number Specifics Price
    Points
    1928-31
    $6.75 / ea.
    Condenser
    1928-31
    $4.95 / ea.
  • Modern Upper Distributor Plate

    This upper plate is modified with and includes modern Ford points and condenser. Both can easily be replaced without even removing the plate. Gets the condenser away from the extreme manifold...

    Part Number Specifics Price
    1928-31 $24.50 / ea.
  • New Model A Distributor

    A brand new Model A distributor for your classic Ford. No exchange needed! Our new antique Ford distributor is constructed with all new component pieces. Available as original or with the...

    Part Number Specifics Price
    As Original
    1928-31
    $121.50 / ea.
    Modern Plate
    1928-31
    $120.50 / ea.
    Modern Upper Plate Wireless Lower Plate
    1928-31
    $125.00 / ea.
  • Plate Spring

    The spring fitting between the upper and lower plate. U.S.A.

    Part Number Specifics Price
    1928-31 $0.75 / ea.
  • Plug Connectors

    The brass strips that run from the spark plugs to the distributor body. U.S.A.

    Part Number Specifics Price
    1928-31 $1.45 / set of 4
  • Point Block

    The block that holds the adjustable half of the points. This piece is not included in a new upper plate. Excellent repro. Not used with modern upper plate. U.S.A.

    Part Number Specifics Price
    USA
    1928-31
    $4.75 / ea.

Pages:  Previous | 1 | 2 | 3 | 4 | Next
Snyder’s Antique Auto Parts, Inc.  12925 Woodworth Rd., New Springfield, Ohio 44443
Toll Free (888) 262-5712  Local (330) 549-5313  Fax (330) 549-2211  Email Send us your comments