Model A Rear Axle
Model A Knock-Off Wheel Puller
$3.50 / ea.
With the wheel still bolted onto the hub, take the axle nut off and screw this on.
Model A Rear Axle Nuts
$2.75 / pr.
Castellated nuts for holding on rear hubs.
Model A Axle Keys
$1.95 / pr.
Check your old keys to be sure that they aren't worn.
Model A Axle Hub Gasket
$0.55 / pr.
A heavy fiber washer that goes in the recess of the hub under the axle washers (A-4244-SW).
Model A Axle Washers
$1.00 / pr.
These thin washers go between the nut and the fiber washer that hold the rear hub to the axle.
Model A Inner Axle & Drive Shaft Seal
$2.25 / ea.
You will need two for the rear axles and one for the drive shaft.
Model A Economy Seal Driver
$7.50 / ea.
This is a low-buck tool for installing the A-4245 seals.
Model A Torque Tube To Housing Bolts
$7.75 / set
Bolts needed to mount the torque tube to the rear end housing with drilled heads and wire.
Model A Universal Gasket Set
$2.25 / set
The gasket set needed for the U-joint.
Model A Universal Joint Bolt Set, Thick Head
$11.50 / set
Complete set of thick head bolts, nuts, and cotter pins for assembling the U-joint housing.
Model A Drive Shaft
$248.00 / ea.
A very well made drive shaft for the Model A.
Model A Pinion Bearing Cup
$51.00 / ea.
This is a double sided cup for the pinion bearings.