EZ Engine Pan Mount Kit
Accessory mounting kit for attaching the engine splash pans to the frame. Makes it a 1-man job instead of a 2-man job! Kit uses modern extruded U-nuts that slide over the frame rail that bolts to attach to. Kit contains 4 long and 2 short u-nut clips, bolts, and lock washers for mounting the engine splash pans to the frame rail. The short clips are used for the front mounting bolt, the long ones are used for the center and rear mounting bolt. Slide the u-nut clips over the frame rail with the threaded portion on top of the lower frame rail until the threads are aligned with the hole in the frame. Run one of your mounting bolts through the hole and start it into the threads to make sure you are aligned properly. Now you’re ready to install the splash pans! DO NOT over-tighten or you will strip the threads. Tighten just enough to collapse the lock washer.