This is the replacement type coil. You must use the coil bracket with this coil. This is a 12 volt coil that can be used for 6 or 12 volts. U.S.A.
Return to the product list
This product has additional items that other customers have found useful or are necessary for proper installation, please check them out.
The black lacquer wire that runs from the coil to the distributor. Comes with two brass wire ends. U.S.A.
This is a modern type coil wire that has the ends soldered in place so you're sure you have a good connection. Also has rubber boot installed. "Genuine Nu-Rex". U.S.A.
For mounting the 1928-34 ignition coil. U.S.A.
If you are running a 12-volt system, you'll need this if you keep the 6-volt coil. Allows you to use the same old coil on the 12-volt system. U.S.A.
Authentic design that can be tightened with a screw driver. Need two. U.S.A.
