Made in U.S.A. with forged ends. The best you can buy! A-2499-B Service Rod is 50-1/2" from end to the center of the hole. A-2864 Emergency Rod is 40-7/8" from the end to the center of the hole. A-2499-B2864 is a complete set of both the emergency brake and the service brake rods. 6-rods
Return to the product list
This product has additional items that other customers have found useful or are necessary for proper installation, please check them out.
The fisheye type as used on the service brake rods. Need 4. Forged for strength.
This is the clevis with the larger size hole in the end. It screws onto the end of the emergency brake rods to connect them to the cross shaft. 2 are required per car.
For all of the brake rods. Available in standard size which is .310 diameter, and if your pin holes are worn, you can drill them out and put in the oversize which are .340 diameter. U.S.A.
The original type flat spring steel anti-rattlers. These bolt to the bracket on the car, and push on the nubs on the brake rods. Not a cheap import, these are top quality U.S. made! 6 per set.
These do the same job as the flat type A-2504/2866 except these wire style return springs were used from September 1931 until the end of production. These come with mounting hardware. Works on...
