Why put up with a leaky or warped manifold when you can install a nice new one and end your troubles! This is the early style that does not have the extra material in the radius where it bends down towards the muffler. But!!! We beefed up the casting internally to avoid the problems that Ford had with them. Nice quality! U.S.A.
Return to the product list
This product has additional items that other customers have found useful or are necessary for proper installation, please check them out.
These intake manifolds have finally arrived. These are the later style with the wiper fitting boss. The boss is drilled and a plug included if you are not running vacuum wipers.
A 100% original super heavy duty ductile iron clamp. Made with cad bolts and brass nuts. Our own manufacture.
Put a bead of this high heat sealant on the flange of the muffler where it bolts to the manifold for a tight seal. Works great!
These fit into the manifold & block recesses for aligning the exhaust ports. U.S.A.
The one piece manifold gasket. Asbestos with steel covering. U.S.A.
Extra heavy cup shaped washers that hold the intake & exhaust manifolds in place. The crown or high point of the washer goes away from the motor. U.S.A.
High heat 'cast blast' paint for the exhaust manifold. Gives the manifold that bare iron appearance as original. 12 ounce aerosol can.
